I was interested to see a pair of n.o.s. 5.75" headlamp rims go for £157 on e-bay.
Anyone got an idea of how much it would cost to re-chrome an old pair to the highest standard?
5.75" headlamp rims
-
Tim Neville
- Posts: 145
- Joined: Sun Oct 29, 2006 5:32 pm
- Location: North Devon
- Contact:
-
Alastair Gregg
- websitedesign
- Posts: 757
- Joined: Sun Aug 27, 2006 10:43 pm
- Your interest in the forum: E2 SA 922 HKY 770
D7 CB 6079 CVG 166
E2 PD 22113 MVU 377 - Given Name: Alastair
- Location: Corrie, Isle of Arran.
Re Chroming
Hello Tim,
There may be a bob or two in this!!!!
There may be a bob or two in this!!!!
Compliments of the Season,
Alastair Gregg
Alastair Gregg
-
Tim Neville
- Posts: 145
- Joined: Sun Oct 29, 2006 5:32 pm
- Location: North Devon
- Contact:
-
chapman
- Posts: 100
- Joined: Fri Oct 13, 2006 4:35 pm
- Your interest in the forum: How to do repairs restoration buy spares have 3 jupters OTB73 runs others under restoration. Have 1947 Austin8 also restored could be for sale
- Given Name: Tom
- Location: Wakefield
chroming
For really quality chroming talk to Arthur at Prestige Electro plating, Unit 6, Cliffe St Industrial Estate, Mexborough,S64 9HU tel 01709 577004.
He likes Jowetts and he is not ridiculously expensive
He likes Jowetts and he is not ridiculously expensive
-
Alastair Gregg
- websitedesign
- Posts: 757
- Joined: Sun Aug 27, 2006 10:43 pm
- Your interest in the forum: E2 SA 922 HKY 770
D7 CB 6079 CVG 166
E2 PD 22113 MVU 377 - Given Name: Alastair
- Location: Corrie, Isle of Arran.
Prestige Plating
I used them in my resto. When they were in Wombwell (or somewhere near)
Good results and not an arm and a leg.
Good results and not an arm and a leg.
Compliments of the Season,
Alastair Gregg
Alastair Gregg
-
Tony Fearn
- Posts: 1743
- Joined: Thu Feb 09, 2006 5:33 pm
- Your interest in the forum: Early pre-wars. Owner of 1933 'Flying Fox' 'Sarah Jane, and 1934 Short saloon 'Mary Ellen'.
- Given Name: Anthony
- Location: Clayton le Moors, Lancashire, the Premier County in the British Isles!!
Hello again Tom.
Perhaps you could recommend Arthur, your electroplating contact, in the Jowetteer, as many of us don't have a clue where to get this sort of thing done properly.
There are so many sob-stories about sub-standard results regarding plating, that to have someone recommended must be of benefit to members.
Regards,
Tony.
Perhaps you could recommend Arthur, your electroplating contact, in the Jowetteer, as many of us don't have a clue where to get this sort of thing done properly.
There are so many sob-stories about sub-standard results regarding plating, that to have someone recommended must be of benefit to members.
Regards,
Tony.
-
chapman
- Posts: 100
- Joined: Fri Oct 13, 2006 4:35 pm
- Your interest in the forum: How to do repairs restoration buy spares have 3 jupters OTB73 runs others under restoration. Have 1947 Austin8 also restored could be for sale
- Given Name: Tom
- Location: Wakefield