Can anyone help with the routing of the wiring loom on a Utility,I have sorted most of it,the problem I have is the routing to the semaphores,I feel it should run down the right hand side to the B pillar where one section goes up to the lamp the other across the floor to the opposite pillar and lamp .If I do this the wiring colours are incorrect and it appears too short to route any other way ,any advice please.
Nigel Jarrett
Wiring Loom
-
Keith Clements
- websitedesign
- Posts: 3968
- Joined: Wed Feb 08, 2006 11:22 am
- Your interest in the forum: Jup NKD 258, the most widely travelled , raced and rallied Jowett.
- Given Name: Keith
- Contact:
Wiring Loom
skype = keithaclements ;