Engine: 7hp, 1932
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Engine: 7hp, 1932
Photos of engine strip down and rebuild
Jowett twin 7hp engine strip down and (hopefully) rebuild with new parts as needed. Mostly complete at the start, but with some modifications to dynamo (reapairable?) and missing distributor and coil.
g_id=34947,_ /PersonalAlbums/Julian/Jowett,_ julian,_
Jowett twin 7hp engine strip down and (hopefully) rebuild with new parts as needed. Mostly complete at the start, but with some modifications to dynamo (reapairable?) and missing distributor and coil.
g_id=34947,_ /PersonalAlbums/Julian/Jowett,_ julian,_
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Front View
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Rear View
Summary
Full engine viewed from rear.
g_id=34955,_ /PersonalAlbums/Julian/Jowett/IMG_6030.JPG,_ julian,_

Full engine viewed from rear.
g_id=34955,_ /PersonalAlbums/Julian/Jowett/IMG_6030.JPG,_ julian,_
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Carburetor
Close-up of carburetor type 30VEH
g_id=34958,_ /PersonalAlbums/Julian/Jowett/IMG_6034.JPG,_ julian,_
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Fuel Pump
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Dynamo
Close-up of dynamo, type C418A AJ3. Note "modification" to distributor drive housing!
g_id=34964,_ /PersonalAlbums/Julian/Jowett/IMG_6037.JPG,_ julian,_
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Timing chain
Close-up of crank(20t), cam(40t) and dynamo(16t) gears and timing chain.
g_id=34967,_ /PersonalAlbums/Julian/Jowett/IMG_6038.JPG,_ julian,_
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Breather
Breather vanes, some missing/damaged
g_id=34970,_ /PersonalAlbums/Julian/Jowett/IMG_6044.JPG,_ julian,_
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Left cyclinder
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Right cylinder
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Piston - 30 thous o/s
Piston top showing 30 thou o/s markings.
g_id=35117,_ /PersonalAlbums/Julian/Jowett/IMG_6052.JPG,_ julian,_
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
White Metal Pieces
Pieces of white metal found in sump plug.
g_id=35120,_ /PersonalAlbums/Julian/Jowett/IMG_6069.JPG,_ julian,_
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Cleaned Heads & Valves
Cylinder heads and valves after clean-up. Valves still to re-grind.
g_id=35123,_ /PersonalAlbums/Julian/Jowett/IMG_6070.JPG,_ julian,_
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Clutch Assembly Removal 1
Cleaned up clutch assembly ready to remove.
g_id=35126,_ /PersonalAlbums/Julian/Jowett/IMG_6071.JPG,_ julian,_
From the JowettTalk webmaster.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Clutch Assembly Removal 2
Screws removed (3 re-fitted loosley to retain plate as springs push plate outwards before prising off).
g_id=35129,_ /PersonalAlbums/Julian/Jowett/IMG_6074.JPG,_ julian,_
From the JowettTalk webmaster.