This is from this month's Flat Four . See the article in the Gallery, JCCNZ, FlatFour
Fit a water temperature sensor in each head (water drain tap) and oil temperature sensor in oil delivery pipe on exit of oil cooler. I modified the bango bolt to take one.
That way you can check jacket temp is above 75 C and oil temp is above 90 C. The header tank and sump temp which are the normal Jav/ Jup locations are not good indicators.
Keep warm.
-
Keith Clements
- websitedesign
- Posts: 3968
- Joined: Wed Feb 08, 2006 11:22 am
- Your interest in the forum: Jup NKD 258, the most widely travelled , raced and rallied Jowett.
- Given Name: Keith
- Contact:
Keep warm.
You do not have the required permissions to view the files attached to this post.
skype = keithaclements ;