The spring had come off the leather seal.
I took out the seal that had been leaking by welding a puller tube onto it.
The tube took out the outer plate using a two armed puller. The hoop took out the inner retainer using a couple of screwdrivers on the end of the shaft.
If I had realised I should have welded the outer plate to the inner retainer to take them both out at once. Perhaps a seal extractor is available that would avoid welding.
JAMES of Midnight Motors gave me a replacement leather seal. These are available from a SNG Barrett E type Jag 2ha-019 leather ones about £12, rubber ones for £5.
Diff pinion oil seal
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Diff pinion oil seal
You do not have the required permissions to view the files attached to this post.
-
BobCulver
- Posts: 30
- Joined: Wed Jul 23, 2014 9:41 am
- Your interest in the forum: member JCC NZ 40 years +, regular contributor to local mag Flat Four
- Given Name: Bob
Re: Diff pinion oil seal
I have always inserted a couple of self tap screws and levered aginst these to remove
Bob Culver
Bob Culver