Hi,
I aim to improve the old Mikansue 1/43 whitemetal kit of the Jupiter and would like someone to tell me the correct height of the windsceen inc frame and the length, height and depth of the bench seat please
Cheers
Alan
Height Of Jupiter Windscreen
-
isleofthanet
- Posts: 67
- Joined: Sat Jun 03, 2006 3:53 pm
- Your interest in the forum: History of the CD Bradfords here in the UK and in New Zealand also Jowett Engineering and HC mill and memories of staff who worked there.
- Given Name: Alan
- Location: Newton Abbot originally Margate
-
paul byrne
- Posts: 18
- Joined: Mon Feb 13, 2006 11:30 pm
- Location: Australia
Allan,
According to my car, screen, measured from top of scuttle to top of widscreen frame, at the angle of the windscreen, is 380mm at outside edges, 315mm at centre, and 330mm half way between ie directly in front of driver or passenger.
Bench seat back is 1100mm wide and about 490mm high. Base is 450mm from front to intersection with seat back.
Hope this helps, happy to take more measuements if you need them.
According to my car, screen, measured from top of scuttle to top of widscreen frame, at the angle of the windscreen, is 380mm at outside edges, 315mm at centre, and 330mm half way between ie directly in front of driver or passenger.
Bench seat back is 1100mm wide and about 490mm high. Base is 450mm from front to intersection with seat back.
Hope this helps, happy to take more measuements if you need them.
Jupiter E1SA440R and ALFA 105 2000GTV competition car
Jowett Car Club of Australia
JOAC
AROCA
Jowett Car Club of Australia
JOAC
AROCA