Does anyone know of a source of the square rubber surrounds for the bumper dumb irons on the Javelin? I've left a message with the Spares answerphone but perhaps one of you guys might know.
Inspired by Tony's Fox I made a start on stitching the Jav together this week and noticed one of the rubbers had split
Regards to all
Ted
Bumper grommets
-
Tony Fearn
- Posts: 1727
- Joined: Thu Feb 09, 2006 5:33 pm
- Your interest in the forum: Early pre-wars. Owner of 1933 'Flying Fox' 'Sarah Jane, and 1934 Short saloon 'Mary Ellen'.
- Given Name: Anthony
- Location: Clayton le Moors, Lancashire, the Premier County in the British Isles!!
- Contact:
-
Leo Bolter
- Posts: 367
- Joined: Sat Feb 10, 2007 10:32 am
- Your interest in the forum: Proud owner of:
1 x 1951 Jowett Jupiter
1 x 1952 LE Velocette
1 x 1952 Jowett Bradford
2 x 1982 Princess 2 litre - Location: R. D. 2, Palmerston North, 4472, New Zealand.
- Contact:
Hi Ted.
It's almost certain the JCC of NZ Spares folk will have the Dumb Iron grommets you desire. I made a mold for them some years ago and some were made from this mold relatively recently. Your (JCC of UK) spares people should have some of that batch . . unless sold out of course. You'll find out in due course.
Let me know via this forum if you don't succeed in finding any in UK and I'll phone the spares people here in NZ and post the availability and cost here for you. With a bit of luck and a tail wind we could be able to get them to you in a few days if you order!
The spares folk here offer a really good service . . . world class in fact!
I'll be watching for your reply . . .
Cheers mate, Leo
It's almost certain the JCC of NZ Spares folk will have the Dumb Iron grommets you desire. I made a mold for them some years ago and some were made from this mold relatively recently. Your (JCC of UK) spares people should have some of that batch . . unless sold out of course. You'll find out in due course.
Let me know via this forum if you don't succeed in finding any in UK and I'll phone the spares people here in NZ and post the availability and cost here for you. With a bit of luck and a tail wind we could be able to get them to you in a few days if you order!
The spares folk here offer a really good service . . . world class in fact!
I'll be watching for your reply . . .
Cheers mate, Leo
R. Leo Bolter,
Palmerston North,
New Zealand.
JCC of NZ - Member No 0741.
JOAC - Member No 0161
Car: Jupiter (E1-SA-513-R)
Skype name = jupiter1951
Messenger name = r.l.bolter"at"massey.ac.nz
Palmerston North,
New Zealand.
JCC of NZ - Member No 0741.
JOAC - Member No 0161
Car: Jupiter (E1-SA-513-R)
Skype name = jupiter1951
Messenger name = r.l.bolter"at"massey.ac.nz
-
Eric Aldcroft
- Posts: 35
- Joined: Wed Feb 08, 2006 5:56 pm
- Location: Tillsonburg, Ontario, CANADA
- Contact:
Bumper Grommets
As I recall it, I bought two from Bill Lock 3 1/2 years ago. I never used them and sent them to the purchaser of my car along with all the other spares.
Who is online
Users browsing this forum: No registered users and 3 guests