Not really an experience; but a tip.
Tightening plugs correctly is important as it greatly governs the operating temperature of the plug and hence all manner of ailments.
Jowetts have flat washes rather than conical; so they should be tightened as follows.
When new screw in by hand; then turn with plug spanner until first resistance is felt, then turn another 90deg. When USED, as previous; but only tighten 30 deg.
Spark plugs
-
Keith Clements
- websitedesign
- Posts: 3968
- Joined: Wed Feb 08, 2006 11:22 am
- Your interest in the forum: Jup NKD 258, the most widely travelled , raced and rallied Jowett.
- Given Name: Keith
- Contact:
Spark plugs
skype = keithaclements ;