Jupiter Exhaust

chapman · Post by **chapman** » Fri Jul 23, 2010 3:48 pm

I bought my Jupiter exhaust from Bill lock and it fitted really well ,it is stainless steel

conrod · Post by **conrod** » Tue Aug 31, 2010 4:42 pm

Sorry to be a pain -
Absolutely desperate for Jupiter exhaust
Any updated news on delivery ?

Alastair Gregg · Post by **Alastair Gregg** » Tue Aug 31, 2010 6:00 pm

No Pain, the supplier however, latest estimate 1 week. Will be chasing.

Alastair Gregg · Post by **Alastair Gregg** » Thu Sep 02, 2010 3:26 pm

Apparently they they ordered the wrong flanges and the right ones will be with them on Monday 6th Sep will ship at the end of that week. So go and see your favourite car club at the beginning of the following week.

conrod · Post by **conrod** » Wed Sep 22, 2010 8:38 am

Collected the exhaust yesterday, have not tried to fit it yet, but looks absolutely fantastic - quality item.
I am most appreciative for all the time and effort and expertise taken in getting it manufactured.

Alastair Gregg · Post by **Alastair Gregg** » Wed Sep 22, 2010 4:58 pm

Let me know how it fits please, as the stock is now depleted and we may have to order more. Sorry it took so long.

conrod · Post by **conrod** » Thu Oct 14, 2010 6:08 pm

Exhaust fitted - quality job - spot on
Just need clamps and gaskets and then very straight forward

Thank you Sir !

Drummond Black · Post by **Drummond Black** » Fri Oct 15, 2010 8:47 am

Fitted a system on Ranald Mackay's Jupiter. Very pleased with pipe runs. Ranald had to make two mounting clamps to allow bobbins to align correctly. Used 1 inch x 1/16th stainless steel strip. All flanges lined up very well. Ranald and myself very pleased with the final result.

Drummond

Alastair Gregg · Post by **Alastair Gregg** » Fri Oct 15, 2010 7:27 pm

Am about to order a further 5 systems, should we ask them to put these strips on or just repeat the order?

Drummond Black · Post by **Drummond Black** » Fri Oct 15, 2010 7:38 pm

Alastair, suggest not fitting any extra mounting points. We maufactured circular clamps that fitted around the ex pipe and had an extension leg that was then drilled to locate on the bobbin. The fitted mounting points were quite a bit out of position. I imagine the final position of the clamp will vary. Deliberately made out of S/Steel so as not to rust on the system.

Are you going to the AGM ? Can supply you with a sketch if required.

Drummond

Alastair Gregg · Post by **Alastair Gregg** » Fri Oct 15, 2010 7:47 pm

I shall order a repeat of what we have. A sketch or photo would be useful for others I suspect.

Sadly am not going to the AGM have a prior commitment. Tim Brown is and will gladly act as a courier (not as experienced as your good self).

JowettTalk

Jupiter Exhaust

Re: Jupiter Exhaust

Re: Jupiter Exhaust

Re: Jupiter Exhaust

Re: Jupiter Exhaust

Re: Jupiter Exhaust

Re: Jupiter Exhaust

Re: Jupiter Exhaust

Re: Jupiter Exhaust

Re: Jupiter Exhaust

Re: Jupiter Exhaust

Re: Jupiter Exhaust