Can anyone tell me the size / type of thread for the nut at the top of the column on a PD with splined wheel. I lost mine during a rebuild about 10 years ago and I think it's time I fitted one.
Ted
Steering wheel nut
-
TedAllen
- Posts: 324
- Joined: Thu Aug 31, 2006 8:34 pm
- Your interest in the forum: Jowett now owned over 40 yrs
- Given Name: ted
- Location: Manchester. The Rainy City
-
David Morris
- Posts: 837
- Joined: Thu Feb 09, 2006 9:23 am
- Your interest in the forum: Jowett Javelins since 1964. Now a Jowett Stationary engine owner and club member since 1964.
- Given Name: David
- Location: Sunny Bristol
Steering Wheel Nut
Hi Ted,
I have dug out a splined shaft and John Airey has very kindly measured it up.
It is missing it's nut, but John's measurements give the thread on the shaft as 11/16 B.S.F. (14 T.P.I.), which was introduced at E2/PD 20881.
Standard Javelins had to manage with the keyed shaft for a bit longer, until they too went over to the splined shaft eventually.
Hope this is useful.
All the best,
David
I have dug out a splined shaft and John Airey has very kindly measured it up.
It is missing it's nut, but John's measurements give the thread on the shaft as 11/16 B.S.F. (14 T.P.I.), which was introduced at E2/PD 20881.
Standard Javelins had to manage with the keyed shaft for a bit longer, until they too went over to the splined shaft eventually.
Hope this is useful.
All the best,
David
-
TedAllen
- Posts: 324
- Joined: Thu Aug 31, 2006 8:34 pm
- Your interest in the forum: Jowett now owned over 40 yrs
- Given Name: ted
- Location: Manchester. The Rainy City
Thanks for that, David, I know how old the car is but not too sure about the column. I'll see if my nut and bolt man has one. we have an ongoing challenge, I'm winning so far, I have beaten him with Thackray washers, Oddie nuts and last week, 3/16 BSF locknuts. If he's got the big nut it will only be 10p and his honour will be satisfied a little.
Ted
Ted
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum