Jupiter side window glass channel

Sporty talk! email JCC UK and JOAC Registrar. Technical Question? Try Service Bulletins or TechNotes or Tech Library first. Note that you need to be a club member to view the Tech Library.. Parts book
Thanks to those who voted for the Jowett Jupiter as Practical Classic's Car of the Year 2010. Read the saga of why the SC deserved to win on JowettTalk-Great SC rebuild or Amy's call to action.
Post Reply
JUP
Posts: 26
Joined: Sun Nov 21, 2021 9:45 am
Your interest in the forum: Own Jowetts
Given Name: Graham
Location: Shropshire

Jupiter side window glass channel

Post by JUP »

Can anyone tell me where I can get the glass channel from and what size it needs to be

Also I will need to adapt a Javelin winder mechanism to fit a Jupiter - has anyone done this ?
RichardMc
Posts: 65
Joined: Mon Jul 30, 2012 9:29 pm
Your interest in the forum: SC Jupiter since 1987. Restoration on going.
Given Name: Richard
Contact:

Re: Jupiter side window glass channel

Post by RichardMc »

I'll measure the channel for you next time I'm in the garage, might be a week on Friday. The window mechanism is not the same as the Javelin one, it's horribly complicated and an absolute pig to fit! If you don't have one it might be easier to use one from something else, I seem to remember the Fiesta ones are quite simple.
Rich
JUP
Posts: 26
Joined: Sun Nov 21, 2021 9:45 am
Your interest in the forum: Own Jowetts
Given Name: Graham
Location: Shropshire

Re: Jupiter side window glass channel

Post by JUP »

Thanks Rich

A photo would be very helpful also if you can and may I be bold and ask for diamentions of each section

This will be so valuable for me and anyone else in the future that is restoring a Jupiter where the windows have been removed
Keith Clements
websitedesign
Posts: 3968
Joined: Wed Feb 08, 2006 11:22 am
Your interest in the forum: Jup NKD 258, the most widely travelled , raced and rallied Jowett.
Given Name: Keith
Contact:

Re: Jupiter side window glass channel

Post by Keith Clements »

There are of course two sides. One is the chrome quarter light bar, the other a thin metal u channel that has normally rusted away. Rubber u section to take the width of the glass is required but this might require some lubrication with silicone. Better would be a fabric covered rubber but I could not source that.

The window glass is held into the lifter with a thin rubber sheet which I also glued.

This link may help.
viewtopic.php?p=7888&hilit=Channel#p7888

viewtopic.php?p=24124#p24124

viewtopic.php?p=24116&hilit=Channel#p24116

Also shows using Jav bits to repair jup mechanism.
search.php?keywords=Winder&fid%5B0%5D=152
skype = keithaclements ;
JUP
Posts: 26
Joined: Sun Nov 21, 2021 9:45 am
Your interest in the forum: Own Jowetts
Given Name: Graham
Location: Shropshire

Re: Jupiter side window glass channel

Post by JUP »

Brilliant help -thank you
RichardMc
Posts: 65
Joined: Mon Jul 30, 2012 9:29 pm
Your interest in the forum: SC Jupiter since 1987. Restoration on going.
Given Name: Richard
Contact:

Re: Jupiter side window glass channel

Post by RichardMc »

I've got some pictures for you, the winder is the drivers side (RHD car) but the window and side window may be from the other side. I was in a bit of a rush because I has 2K epoxy primer on the go and it's a bit time critical between coats, or so the data sheet said. There might be a bit mising from the rear, as Keith said it could be the bit that disolves, I've possibly got some of it left but it wasn't in the obvious pile of bits.
Anyway, hope this helps.
You do not have the required permissions to view the files attached to this post.
Rich
RichardMc
Posts: 65
Joined: Mon Jul 30, 2012 9:29 pm
Your interest in the forum: SC Jupiter since 1987. Restoration on going.
Given Name: Richard
Contact:

Re: Jupiter side window glass channel

Post by RichardMc »

Batch 2
You do not have the required permissions to view the files attached to this post.
Rich
RichardMc
Posts: 65
Joined: Mon Jul 30, 2012 9:29 pm
Your interest in the forum: SC Jupiter since 1987. Restoration on going.
Given Name: Richard
Contact:

Re: Jupiter side window glass channel

Post by RichardMc »

Last Batch
You do not have the required permissions to view the files attached to this post.
Rich
JUP
Posts: 26
Joined: Sun Nov 21, 2021 9:45 am
Your interest in the forum: Own Jowetts
Given Name: Graham
Location: Shropshire

Re: Jupiter side window glass channel

Post by JUP »

Thanks Rich
When I have adapted a Javelin one, I will post the alterations needed for the file for future restorations
RichardMc
Posts: 65
Joined: Mon Jul 30, 2012 9:29 pm
Your interest in the forum: SC Jupiter since 1987. Restoration on going.
Given Name: Richard
Contact:

Re: Jupiter side window glass channel

Post by RichardMc »

My 'supervisor' thinks Drummond Black did a Javelin conversion several years ago.
Rich
Post Reply

Return to “Jupiter”