Wiper arm
-
David Kemp
- Posts: 628
- Joined: Sun Mar 09, 2008 1:18 pm
- Location: Brisbane ,Australia
-
StevenGray
- Posts: 57
- Joined: Fri Mar 14, 2008 11:39 pm
- Your interest in the forum: Jowett Bradford 1948 "CB" Model
- Given Name: Steven
- Location: West Midlands
Re: Wiper arm
I think that this is as near as you can get unless you find an old one somewhere
https://www.s-v-c.co.uk/products/ca738- ... -wiper-arm
Steve
https://www.s-v-c.co.uk/products/ca738- ... -wiper-arm
Steve
Bradford Owner since 1971
-
ajg1722
- Posts: 35
- Joined: Tue Jul 22, 2014 6:10 pm
- Your interest in the forum: Current restoration projects: Bradford CC Truck, 1939 Tatra 57b.
Also have 1953 Ariel Square Four, 1958 Velocette Venom, 195? Panther M100, 1963 Standard 7cwt Van, 1963 Standard 7cwt Pickup, 1976 MZ TS250/1, 1984 MZ ETZ250, 2001 Toyota Hilux, plus a couple of CZ 175 bikes, all variously running or awaiting restoration. - Given Name: Andrew
Re: Wiper arm
Here's some info from an old Trico catalogue (dated 1959) which you may find helpful
Cheers,
Andrew
Cheers,
Andrew
You do not have the required permissions to view the files attached to this post.
-
David Kemp
- Posts: 628
- Joined: Sun Mar 09, 2008 1:18 pm
- Location: Brisbane ,Australia
Re: Wiper arm
Thank you. i have an old phase one Vanguard ute and noticed the wiper arm looked similar to the catalouge.
Seems someone in the past has put a Bradford style motor & arm on it . the arm is now on the Bradford . My son had a stack of blades from a job lot purchase , one fits the arm !
If you are upset by me cannabilising the Vanguard , please dont be. This will probably never go again as a tree fell on it and crushed the body. My daughter is also protecting the remains from my preditations by threatening assault if I do anything to the remains that can't be redone.
Ie I was going to cut the centers out if the wheels & use the 4 1/2 inch outers on my jupiter.
I value my life more than the rims......they are still on the ute.
Seems someone in the past has put a Bradford style motor & arm on it . the arm is now on the Bradford . My son had a stack of blades from a job lot purchase , one fits the arm !
If you are upset by me cannabilising the Vanguard , please dont be. This will probably never go again as a tree fell on it and crushed the body. My daughter is also protecting the remains from my preditations by threatening assault if I do anything to the remains that can't be redone.
Ie I was going to cut the centers out if the wheels & use the 4 1/2 inch outers on my jupiter.
I value my life more than the rims......they are still on the ute.
Good memories of Bradfords.