We are trying to reinstall the sunroof on the Jowett 10 it was sealed up and covered over years ago .Has anyone got any ideas as to the material that goes around the frame to stop the water leaking in .also what is used to make the sunroof well at the back .
What is the profile of the seal that goes along the leading edge of the rear panel any help /pictures would be appreciated
Jowett 10 sunroof
-
nigel jarrett
- Posts: 144
- Joined: Sun Jan 04, 2009 11:58 pm
- Your interest in the forum: Javelin and pre war
- Given Name: Nigel
- Location: TEIGNMOUTH DEVON
Jowett 10 sunroof
have just purchased a javilin and will need all the help i can get
-
k. rogers
- Posts: 480
- Joined: Thu Feb 23, 2006 9:43 pm
- Your interest in the forum: 1933 7hp Kingfisher
1935 7hp Weasel
1928 7hp Sports replica
1952 Bradford special - Given Name: Ken
- Location: Cornwall
Re: Jowett 10 sunroof
Hi Nigel, pleased you're attempting to revive the sunroof. Have you asked Geoff as his 8 should be the same construction?
7hp Weasel & Kingfisher
-
Chris Spencer
- Posts: 1937
- Joined: Sat Oct 24, 2009 8:45 pm
- Your interest in the forum: Jowett Restoration Specialist
- Given Name: Chris
- Location: Hampshire. UK
Re: Jowett 10 sunroof
Just to confirm Jowett 8 & Jowett 10's both utilised the same bodyshell / door closures etc - although the styling of the front end panels were different - hence measurements / materials from a 8 sunroof should transfer to a 10 without issue
37 Jowett 8 HP - In many parts
52 Javelin Std 'Taxi Livery'
52 Javelin Std Patina project
52 Javelin Std Sports project
52 Jupiter SA - Original car - full restoration project
52 Javelin Std 'Taxi Livery'
52 Javelin Std Patina project
52 Javelin Std Sports project
52 Jupiter SA - Original car - full restoration project