Starter ring, rev and speedo drives
-
tonygunton
- Posts: 15
- Joined: Wed Oct 18, 2017 3:57 pm
- Your interest in the forum: Seek technical advice and locate spares.
- Given Name: Tony
Starter ring, rev and speedo drives
Work is progressing on the overdrive installation in as much as everthing now removed, and ready to be shipped for propshavft extension and gearbox overdrive assembly. A few problems on the way. The tooth ring on the fly wheel could do with replacing. Are these available? I need a 90degree speedo drive to make connection with the overdrive, where can I get these. Finally as a seperate issue the 90 degree rev counter drive on the dynamo needs rebuilding or replacing can anyone help? Many thanks in anticipation.
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
Re: Starter ring, rev and speedo drives
Rev counter drives used to be available from JOAC but JCS may have them.
I have T pieces I used for rallying and driving the HALDA and Speedpilot, so that might be a source.
Flywheel rings might be available via JCS. I think some people have removed them and turned them around!
I have T pieces I used for rallying and driving the HALDA and Speedpilot, so that might be a source.
Flywheel rings might be available via JCS. I think some people have removed them and turned them around!
-
Srenner
- Posts: 556
- Joined: Sat Mar 04, 2006 7:32 am
- Your interest in the forum: Like to look at pictures
- Given Name: Scott
- Location: United States
Re: Starter ring, rev and speedo drives
Ring gear: I believe the NZ club has them. Also, Jowettpartsusa has a few new ones. Jowettpartsusa at protonmail.com
90* drive: Moss 021-511
Used at both the gauge and at the overdrive unit.
90* drive: Moss 021-511
Used at both the gauge and at the overdrive unit.