Rear Axles

Sporty talk! email JCC UK and JOAC Registrar. Technical Question? Try Service Bulletins or TechNotes or Tech Library first. Note that you need to be a club member to view the Tech Library.. Parts book
Thanks to those who voted for the Jowett Jupiter as Practical Classic's Car of the Year 2010. Read the saga of why the SC deserved to win on JowettTalk-Great SC rebuild or Amy's call to action.
Post Reply
M S G Benning
Posts: 118
Joined: Sun Oct 19, 2008 11:54 am
Location: Worcestershire
Contact:

Rear Axles

Post by M S G Benning »

Are the above common to both Jup & Jav, or is there anything specific that tells you what to look for on one for a Jup? :? Steph.
to exchange information
Keith Clements
websitedesign
Posts: 3820
Joined: Wed Feb 08, 2006 11:22 am
Your interest in the forum: Jup NKD 258, the most widely travelled , raced and rallied Jowett.
Given Name: Keith
Contact:

Re: Rear Axles

Post by Keith Clements »

There are early and late axles on the Jav and a different one on the Jup. Although a Late Jav axle can be made to fit a Jup but it has a different ratio so will not be any good for motorway driving.

See the technical notes for details.
skype = keithaclements ;
M S G Benning
Posts: 118
Joined: Sun Oct 19, 2008 11:54 am
Location: Worcestershire
Contact:

Re: Rear Axles

Post by M S G Benning »

So you can't tell by looks alone then? Meaning presumably they have to be taken apart for a teeth 'count'? Oh & the technical notes you refer to, where might they be found?
to exchange information
David Morris
Posts: 771
Joined: Thu Feb 09, 2006 9:23 am
Your interest in the forum: Jowett Javelins since 1964. Now a Jowett Stationary engine owner and club member since 1964.
Given Name: David
Location: Sunny Bristol
Contact:

Re: Rear Axles

Post by David Morris »

Hi, if you are lucky, there should be a metal tab about the size of a postage stamp, secured by one of the bolts to the differential cover plate, giving the ratio of the axle. As Keith says, the Javelin ones have a different ratio to those fitted to Jupiter's.

Both are good old Salisbury units, fitted to lots of classics, especially early Series Landrovers. I did hear somewhere that Jowett's bought-in the differential housing, complete with innards, but fitted their own manufacture outer tubes and mounting lugs etc. Personally, I doubt this, as the outer bearings are taper rollers, adjusted by shims, which is a really good arrangement. When you look at the miserable set-up with ball bearings that Jowett fitted to the front wheels, they would have thought taper bearings on the rear axle were just not necessary? No, I suspect Salisbury gave them a price for the complete rear axle that made it look attractive. Jowett's probably then just welded on their 'bits' to fit the upper and lower arms?

All the best,

David
richard turner
Posts: 55
Joined: Fri Jan 29, 2010 1:03 pm
Your interest in the forum: I have enjoyed Jowetteering for many years and am about to embark on the restoration of a Javelin.
Given Name: Richard
Location: Colwyn Bay, North Wales
Contact:

Re: Rear Axles

Post by richard turner »

Jack up one rear wheel.
Hand brake off.
Make a mark on elevated wheel rim.
Make a mark on crankshaft pulley.
Select fourth gear.
Ask your assistant to turn engine over and count the number of revolutions it takes for the watched rear wheel to complete one revolution.
The answer is the diff ratio.
The same may be completed on a removed axle with one wheel locked and turning the pinion.
Rich
Just enjoy keeping in touch with fellow enthusiasts.
David Kemp
Posts: 552
Joined: Sun Mar 09, 2008 1:18 pm
Location: Brisbane ,Australia
Contact:

Re: Rear Axles

Post by David Kemp »

Isn't there also a width difference between Javelin & Jupiter rear axles?
Good memories of Bradfords.
richard turner
Posts: 55
Joined: Fri Jan 29, 2010 1:03 pm
Your interest in the forum: I have enjoyed Jowetteering for many years and am about to embark on the restoration of a Javelin.
Given Name: Richard
Location: Colwyn Bay, North Wales
Contact:

Re: Rear Axles

Post by richard turner »

The Jupiter has a wider track. I've never checked but I have wondered whether the axle tubes are pegged into the diff casing and whether or not they could therefore be extended to suit a Jupiter. Javelin axles do look odd when fitted to a Jupiter.
Just enjoy keeping in touch with fellow enthusiasts.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests