pull switches
-
JohnSchofield
- Posts: 18
- Joined: Sat Feb 04, 2012 6:48 pm
- Your interest in the forum: I have a 1952 Jupiter SA which I bought from Joe Leach late last year. I also have a pre-war Rolls-Royce which uses much more petrol.
pull switches
the four pull switches arranged around the light/ignition switch (wiper, panel, heater, fog) have knobs attached by screw threads. Does anyone know what the thread is? My best guess is 3 BA, but it feels quite slack. We were asked rarely to specify the odd numbers when I was a lad.
-
JohnBetteridge
- Posts: 3
- Joined: Thu Mar 07, 2013 8:46 pm
- Your interest in the forum: New Jowett Jupiter owner. Would like to communicate with other owners.
Re: pull switches
Hi John,
Made a few sets of these knobs and the thread I used was 8-32 UNC, look in your Zeus book under British Standard Pipe Threads
Made a few sets of these knobs and the thread I used was 8-32 UNC, look in your Zeus book under British Standard Pipe Threads
-
Keith Clements
- websitedesign
- Posts: 3968
- Joined: Wed Feb 08, 2006 11:22 am
- Your interest in the forum: Jup NKD 258, the most widely travelled , raced and rallied Jowett.
- Given Name: Keith
- Contact:
Re: pull switches
Added Zeus book to Gallery, optimised from 16MB to 0.3MB with no discernable degradation.
skype = keithaclements ;
-
JohnSchofield
- Posts: 18
- Joined: Sat Feb 04, 2012 6:48 pm
- Your interest in the forum: I have a 1952 Jupiter SA which I bought from Joe Leach late last year. I also have a pre-war Rolls-Royce which uses much more petrol.
Re: pull switches
thanks for the info, I will search through my tap drawer.