Hi Keith,
Glad you had a good time in NZ.
I have attached the plans . I had assumed the door pillars were 90 degrees off the timber that lies on top of the chassis but after I built my frame I had to cut the top wood behind the door pillars and lean the pillar back 15mm off vertical. This allowed the bonnet to fit properly.
Good luck with Jack's build. Keen to see photo's of his progress.
Best....
Gaven Armit
See this post for pictures
Plans for wood
-
Keith Clements
- websitedesign
- Posts: 3968
- Joined: Wed Feb 08, 2006 11:22 am
- Your interest in the forum: Jup NKD 258, the most widely travelled , raced and rallied Jowett.
- Given Name: Keith
- Contact:
Plans for wood
You do not have the required permissions to view the files attached to this post.
skype = keithaclements ;