JowettTalk

When the clutch is depressed on my Jupiter, at the point of foot pressure a constant”rotational noise” is present until the clutch is released I am suspecting that the clutch throwout bearing needs replacing but can not find any technical information on how to do this. Can anyone direct me to techni...

Keith Clements wrote:I suggest an email to spares@jowett.org

Thanks Keith, I will contact them and see what is available.

I have found play on both front suspension units,it appears to be between the thread of upper link pin 50286 and the yoke 50278. Can anyone advise the best way to dismantle the upper part of the front suspension and which parts are available from JC Spares, as replacements for whatever is worn. Any ...

P1030858 reduced.jpg Thanks for your inputs. In the end I purchased a new Brian James Clubman at a good price, more expensive than second hand but they hold their price quite well. Chose a Brian James Clubman because lengthwise will just fit in the garage whereas the Ifor Williams was just a few in...

I am looking to purchase a transporter trailer for my Jupiter - has anyone got one for sale or knows of one on offer. New, a suitable one is expensive, so I am looking for second hand in reasonable to good condition. Have identified the ideal models as Ifor Williams CT136TA, Bateson 22-15, or Brian ...

Thanks to both of you, I'm now feeling a more comfortable about removing material. I will do some more dimensional checks and the square off the outlet from the timing case cover and reduce the inlet to the pump housing to give the 3mm gap and a good area for the clips to clamp on. I have incorporat...

Just rebuilt my JUPITER water pump using a new water pump casting supplied by JCC (part No J54505). When the water pump was refitted above the front timing case cover, the distance between fixing points on each component, for the "dynamo and water pump strap", was 20mm longer than the dist...