JowettTalk

I have made a recent purchase of a 1935 Jowett Curlew.
It was on the road until an engine issue stopped play which is how I've bought it.
It requires big end replacement as well as a full gasket kit, oil float, starter cranking handle and a fuel cap.
Any advice or if the required parts are available please contact me.
Thanks in advance

Congratulations on what will be a very nice car! Try Club spares in the first instance. They will definitely have most gaskets for the 7 and may even have some of those other bits. Of course, you will be up against re-metalling of the big ends.