Lubricating stering rack
-
Alan Stanley
- Posts: 90
- Joined: Fri Aug 25, 2006 9:25 am
- Your interest in the forum: Nice Javelin, Concours Jupiter, half share in Jowett 10 slowly being restored. Third share in Bradford six light under restoration
- Given Name: Alan
- Location: Aucjkland, New Zealand
- Contact:
Lubricating stering rack
What are all you Jupiter owners doing to lubricate the steering rack? The handbook indicates to grease it, however it has a brass filler type opening like the gearbox. Am a liitle confused on how to attend to the lubrication?
-
Forumadmin
- Site Admin
- Posts: 20648
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
I put EP 60 gearbox oil in the rack because it does not hold the grit like grease and flushes any of it into the boots at each track rod. The pumping action turning the steering wheel from side to side on gravel roads or dusty conditions draws grit into the system causing wear on the aluminium casing.
I use grease on the pinion and universal joint which should have grease nipples.
Ref.
http://jowett.org/jowettnet/dt/tech/mot ... er/mt8.gif
I use grease on the pinion and universal joint which should have grease nipples.
Ref.
http://jowett.org/jowettnet/dt/tech/mot ... er/mt8.gif
-
Mike Allfrey
- Posts: 491
- Joined: Thu Apr 06, 2006 10:14 am
- Your interest in the forum: It is a good vehicle for getting Jowett information to others.
- Given Name: Michael
- Location: Melbourne, AUSTRALIA.