I have been changing my Deluxe model choke cable because the one fitted was too short and was not secured properly at the far end. However, I now find that at the top end, the knob is nearly touching the speedo trip reset. Either the mileage reset spindle is too long or perhaps somebody in the past might have bent the bracket for some reason, Can some kind soul post an under the dashboard picture of the relationship between the choke knob and the speedo?
Thanks in advance
Nick
Choke Cable
-
Nick Webster
- Posts: 313
- Joined: Thu Sep 18, 2008 11:38 pm
- Your interest in the forum: Jowett Javelin Registrar
- Given Name: Nick
- Location: Cromer, Norfolk UK
Choke Cable
JCC Member
-
Keith Clements
- websitedesign
- Posts: 3968
- Joined: Wed Feb 08, 2006 11:22 am
- Your interest in the forum: Jup NKD 258, the most widely travelled , raced and rallied Jowett.
- Given Name: Keith
- Contact:
Re: Choke Cable
This might help but the dash on Amy's Jav is not standard.
You do not have the required permissions to view the files attached to this post.
skype = keithaclements ;
-
Nick Webster
- Posts: 313
- Joined: Thu Sep 18, 2008 11:38 pm
- Your interest in the forum: Jowett Javelin Registrar
- Given Name: Nick
- Location: Cromer, Norfolk UK
Re: Choke Cable
Thanks, Keith. I should have said "second type of wooden dashboard" really but never the less, your photo shows the bracket clearly and that it is not set at an angle. I guess that the later arrangment of instruments was done in spite of the close proximity of speedo trip and choke knob.
Nick
Nick
JCC Member