This is interesting...I know a couple guys in resto who have done this and are very pleased
http://www.youtube.com/watch?v=KJeXwsl87us
And for Aluminium...not electolyis as above...engine casings carbs etc
Clean off all dirt, grease
mix up teaspoon cittic acid out of the spice cupboard in 1/2 cup warm water
Apply with a fine brass wire brush...dont scrubb...
but keep damp over several hrs...wash off and give a light buff.
If corrossion is real bad, 50/50 soln battery acid and water...wear cloves
And doint leave on too long Sulphuric acid and Alumoinim is very reactive. Dont use on carbs.
Old School Hot Rodder tricks
Rust removal
-
Keith Andrews
- Posts: 941
- Joined: Wed Jul 26, 2006 8:11 am
- Location: New Zealand
- Contact:
Rust removal
My Spelling is Not Incorrect...It's 'Creative'